Vietnamese English

What does ISO 6487 specify?

In automotive crash tests, the accuracy of results depends not only on the quality of the sensors but also on the ability to collect, process, and synchronize measurement data. Even a small deviation in signal or timing can affect the analysis and evaluation of test results. This is why ISO 6487 – Road Vehicles: Measurement Techniques in Impact Tests – Instrumentation – is one of the crucial technical standards for crash test laboratories.

 

What is ISO 6487?

ISO 6487 is an international standard that specifies the technical requirements and recommendations for measurement equipment systems used in vehicle crash tests. The main objective is to ensure that collected data is reliable and consistent, enabling different laboratories to accurately compare test results.

The standard applies to the entire measurement chain, from sensors and signal conditioners to data acquisition systems (DAQ) and signal processing steps.

 

Key technical aspects of ISO 6487

1. Channel Frequency Class (CFC)

ISO 6487 specifies CFC frequency ratings such as 60, 180, 600, and 1000. These parameters represent the frequency response characteristics of the entire measurement channel, helping to ensure that the recorded and filtered signals are appropriate to the characteristics of the collision phenomenon.

2. Channel Amplitude Class (CAC)

CAC defines the full-scale amplitude limit of a channel's measurement range. Selecting the appropriate CAC helps avoid signal overload while ensuring accuracy within the required measurement range.

3. System calibration and accuracy

The standard specifies requirements for sensitivity, linearity, frequency response, and measurement channel calibration. In particular, the nonlinearity of the measurement channel must be controlled within specified limits to ensure that the data accurately reflects the actual physical quantities.

4. Time synchronization and signal processing

ISO 6487 also addresses phase delay, time systems, relative delay between channels, and signal filtering methods. These are crucial factors when simultaneously analyzing data from hundreds of sensors in a collision.

 

How important is ISO 6487 for a Crash Test Lab?

Adherence to ISO 6487 helps laboratories build measurement systems with better consistency, accuracy, and data traceability. The correct selection of sensors, DAQ (Digital Sensors Apparatus), amplifiers, and signal filtering configurations is fundamental to ensuring the quality of test results.

Zalo GPower Vietnam - Your trusted partner, Your best friend, Your family 0936093289 telephone GPower Vietnam - Your trusted partner, Your best friend, Your family 0936093289 Mail GPower Vietnam - Your trusted partner, Your best friend, Your familyInfo@gpower.com.vn